Connecting earbuds to Repo works the same way as any Bluetooth device, but Repo has a few quirks worth knowing
Repo devices use standard Bluetooth, so most earbuds will pair without special software or apps. The main difference is that Repo's pairing menu is buried one level deeper than you might expect, and once paired, Repo remembers your earbuds — so you won't have to repeat the process every time. If your earbuds won't connect, it's usually because Repo is still paired to a different device, or your earbuds are in pairing mode but Repo isn't looking for them.
The steps below work for any Bluetooth earbuds: AirPods, Samsung Galaxy Buds, Sony WF-C700N, or generic models from any brand. If you're pairing for the first time, set aside five minutes. If you've paired before and it's not working, jump to the troubleshooting section.
Key Takeaways
- Put your earbuds in pairing mode first — usually by holding the button on the case for three to five seconds until a light blinks.
- On Repo, open Settings, tap Bluetooth, then tap "Search for devices" to make Repo look for your earbuds.
- Tap your earbuds' name when it appears in the list, and Repo will connect within a few seconds.
- Once paired, your earbuds will reconnect to Repo automatically when you turn them on, as long as Repo's Bluetooth is on.
- If pairing fails, restart both devices and try again — this fixes most connection problems.
Put your earbuds in pairing mode
Before Repo can find your earbuds, the earbuds have to be in pairing mode. This tells them to broadcast their Bluetooth signal so other devices can see them. The method depends on your earbud model, but most follow one of two patterns.
For earbuds with a physical button on the case: hold the button for three to five seconds until you see a light blink — usually white, blue, or alternating colors. The light tells you pairing mode is active. Leave the case open or nearby; some earbuds turn off pairing mode if you close the case.
For earbuds with a button on each earbud: hold the button on one earbud for three to five seconds until the light blinks. If you have the manual or the original box, check it — the exact timing varies by brand. If you've lost the manual, search "[your earbud brand] pairing mode" online and you'll find the right steps in seconds.
Once the light is blinking, move to Repo. You have about two to three minutes before pairing mode times out, so work quickly but don't rush.
Open Bluetooth settings on Repo and search for devices
On your Repo device, tap the Settings icon — it looks like a gear and is usually on the home screen or in the app drawer. Scroll down and tap Bluetooth. You'll see a toggle at the top; make sure it's turned on (it should show blue or "On").
Below the toggle, you'll see a button or link that says "Search for devices", "Scan", or "Add device" — the exact wording varies by Repo model. Tap it. Repo will now look for any Bluetooth devices in pairing mode nearby.
Wait five to ten seconds. Your earbuds' name should appear in a list below. It might say something like "Sony WF-C700N" or "AirPods Pro" or just a model number — whatever name the manufacturer gave them. If nothing appears after fifteen seconds, go back and check that your earbuds are still in pairing mode (the light should still be blinking).
Tap your earbuds' name to connect
When you see your earbuds' name in the list, tap it once. Repo will attempt to connect. You'll see a spinning icon or the word "Connecting" for a few seconds, then either a checkmark or the word "Connected" will appear next to the name.
Once connected, you can close the Bluetooth settings. Your earbuds should now play audio from Repo. Test by opening a video or music app and playing something — you should hear it through the earbuds, not the Repo speaker.
If you see "Paired" but not "Connected", tap the name again. Sometimes Repo pairs but doesn't connect on the first try, and a second tap fixes it.
What to do if your earbuds don't appear in the list
If you wait fifteen seconds and your earbuds' name never shows up, the most common cause is that pairing mode timed out. Go back to your earbuds, hold the button again for three to five seconds until the light blinks, then return to Repo and tap "Search for devices" again.
The second most common cause is that your earbuds are already paired to a different device — a phone, laptop, or tablet you used them with before. Earbuds can only connect to one device at a time, so if they're paired to your phone, Repo won't see them. Unpair them from the other device first: go to that device's Bluetooth settings, find your earbuds' name, and tap "Forget" or "Remove". Then put the earbuds back in pairing mode and try Repo again.
If you've done both of those and still see nothing, restart both devices. Turn off your earbuds (or put them back in the case), wait ten seconds, then turn them back on. At the same time, restart Repo by holding the power button until it shuts down, then turn it back on. Once both are running again, put the earbuds in pairing mode and search from Repo's Bluetooth settings one more time.
Reconnecting after the first time
After you've paired once, you won't have to repeat these steps. The next time you turn on your earbuds, they'll automatically look for Repo. If Repo's Bluetooth is on, they'll connect within a few seconds — no pairing mode, no searching, no tapping required.
If your earbuds connect to a different device instead (like your phone), you'll need to manually disconnect them from that device first. Then turn on Repo's Bluetooth and the earbuds will connect to Repo. You can also go into Repo's Bluetooth settings and tap your earbuds' name to force a connection if they're taking too long.
If you want to unpair your earbuds from Repo permanently — for example, if you're selling the device or switching to different earbuds — go to Repo's Bluetooth settings, find your earbuds' name, and tap "Forget" or "Remove". This erases the pairing, and you'll have to go through the full pairing process again if you want to use them with Repo later.
Troubleshooting persistent connection problems
If your earbuds keep disconnecting or won't stay connected, the issue is usually interference or a weak Bluetooth signal. Move Repo and your earbuds closer together — within ten feet is ideal. If you're in a crowded area with many other Bluetooth devices (like an office or coffee shop), move to a quieter spot and try again.
If disconnections happen only in one location, something in that space is interfering with Bluetooth — often a microwave, Wi-Fi router, or cordless phone. Move away from those devices or turn them off temporarily to test.
If the problem persists everywhere, try clearing Repo's Bluetooth cache. Go to Settings, find Apps or Application Manager, search for Bluetooth, tap it, and look for a "Clear Cache" button. This erases temporary files that sometimes cause connection problems. You won't lose your pairing — Repo will still remember your earbuds — but the connection may work better afterward.
Frequently Asked Questions
Do I need to put my earbuds in pairing mode every time I use them?
No. Pairing mode is only for the first connection. After that, your earbuds will automatically reconnect to Repo when you turn them on, as long as Repo's Bluetooth is on. You only need pairing mode again if you unpair them or pair them to a new device.
Can I use two pairs of earbuds with Repo at the same time?
No. Repo can only play audio through one Bluetooth device at a time. If you pair two sets of earbuds, you'll have to choose which one to connect to each time. You can switch by going to Bluetooth settings and tapping the name of the earbuds you want to use.
Why do my earbuds keep connecting to my phone instead of Repo?
Earbuds remember multiple devices and usually connect to whichever one they paired with most recently. If your phone's Bluetooth is on and Repo's is off, they'll connect to your phone. Turn on Repo's Bluetooth and they should switch. If they don't, manually disconnect them from your phone's Bluetooth settings, then turn on Repo's Bluetooth.
What if my earbuds are too old to connect to Repo?
Almost all Bluetooth earbuds made in the last ten years will work with Repo, since Repo uses standard Bluetooth. If your earbuds are older or from an unusual brand, check the manual or the manufacturer's website to confirm they support Bluetooth. If they do but still won't pair, try the troubleshooting steps above — most connection problems are fixable without replacing the earbuds.
Can I pair my earbuds to Repo if they're already paired to another device?
Not at the same time. Earbuds can only connect to one device at a time. You'll need to unpair them from the other device first by going to that device's Bluetooth settings and tapping "Forget" or "Remove". Then put the earbuds back in pairing mode and pair them to Repo.