Pairing a Logitech keyboard to your iPad takes about five minutes and works the same way whether you're using Bluetooth or a USB receiver

Most Logitech keyboards connect to your iPad through Bluetooth, which means they talk to each other wirelessly without any cable or receiver. Some older Logitech models use a small USB receiver instead, but the pairing process is similar. Before you start, make sure your keyboard is charged or has fresh batteries — a keyboard that won't turn on won't pair with anything.

The steps below work for iPad models running iPadOS 14 and newer. If your iPad is older, the menu locations might be slightly different, but the basic process is the same. You'll need to be in the same room as your keyboard during pairing, and you should have no other Bluetooth devices actively trying to connect at the same time.

Key Takeaways

  • Turn on your Logitech keyboard and hold the Bluetooth button for three seconds until the light blinks, which puts it in pairing mode.
  • Go to Settings, then Bluetooth on your iPad, and select your keyboard from the list of available devices.
  • If your keyboard uses a USB receiver instead of Bluetooth, plug the receiver into your iPad's charging port using a USB adapter.
  • Once paired, your keyboard will reconnect automatically when you turn it on near your iPad, and you can forget the pairing from Bluetooth settings if you need to start over.

Turn on your keyboard and enter pairing mode

Locate the power button on your Logitech keyboard — on most models, it's a small switch on the side or back. Slide it to the On position. You should see a light turn on, usually white or blue. If the light doesn't come on, the keyboard needs charging or new batteries.

Next, find the Bluetooth button on your keyboard. On Logitech keyboards, this is often a small button with a Bluetooth symbol (looks like a sideways "B" made of dots). Hold this button down for about three seconds. The light on your keyboard should start blinking, which means it's now in pairing mode and searching for a device to connect to. Leave it in this state — don't release the button and walk away, just hold it until you see the blinking start.

Open Bluetooth settings on your iPad

On your iPad, open the Settings app. This is the gray icon with gears on it, usually on your home screen or in the app library. Tap Settings, then look for Bluetooth in the left-hand menu. Tap Bluetooth to open it.

Make sure Bluetooth is turned on — you'll see a toggle switch at the top of the screen. If it's already on, the switch will be green. If it's off, tap it once to turn it on. Your iPad will now start searching for nearby Bluetooth devices, including your keyboard.

Select your keyboard from the available devices list

Wait a few seconds for your iPad to find your keyboard. You should see a list of available devices appear on the screen. Look for your Logitech keyboard by name — it will usually say something like "Logitech K380" or "Logitech Keys-to-Go" depending on which model you own. The exact name is printed on the keyboard itself or in the manual that came with it.

Tap on your keyboard's name in the list. Your iPad will now attempt to pair with it. You may see a prompt asking you to confirm the connection — if so, tap Pair or Connect. Within a few seconds, the status next to your keyboard's name should change to "Connected," and the blinking light on your keyboard should stop and stay steady.

What to do if your keyboard uses a USB receiver instead

Some older Logitech keyboards come with a small USB receiver (a tiny dongle) instead of using Bluetooth. If your keyboard came with a receiver, you don't need to pair it through Bluetooth settings. Instead, you'll plug the receiver directly into your iPad.

Your iPad's charging port is either USB-C (newer models) or Lightning (older models). You'll need a USB adapter that matches your iPad's port type and has a USB-A slot where the receiver plugs in. These adapters are sold separately and cost between $10 and $20. Once you have the adapter, plug the receiver into it, then plug the adapter into your iPad's charging port. Your keyboard should start working immediately — no pairing needed.

Test your keyboard and troubleshoot if it's not working

Open any app where you can type, like Notes or Mail. Tap in a text field and try typing a few letters. If the letters appear on your screen, your keyboard is working. If nothing happens, try these steps: First, make sure your keyboard is still turned on and the light is still on. Second, go back to Bluetooth settings and check that it still says "Connected" next to your keyboard's name. If it says "Not Connected," tap the keyboard name again to reconnect.

If your keyboard still won't work, try forgetting it and pairing again. In Bluetooth settings, tap the information icon (a small "i" in a circle) next to your keyboard's name, then tap "Forget This Device." Turn your keyboard off and back on, hold the Bluetooth button again for three seconds, and repeat the pairing steps from the beginning. This usually fixes connection problems that happen after the first pairing.

Reconnecting your keyboard after you turn it off

Once your keyboard is paired, you don't have to pair it again every time you use it. When you turn your keyboard back on and it's near your iPad, it will automatically reconnect within a few seconds. You'll see the light on your keyboard turn on, and you can start typing right away.

If your keyboard doesn't reconnect automatically, make sure Bluetooth is still turned on in your iPad's settings. You can also try turning your keyboard off and back on again. If you're moving to a different iPad or giving your keyboard to someone else, you can forget the pairing by going to Bluetooth settings, tapping the information icon next to your keyboard's name, and selecting "Forget This Device."

Frequently Asked Questions

Why won't my keyboard show up in the Bluetooth list?

Your keyboard needs to be in pairing mode for your iPad to see it. Hold the Bluetooth button for three seconds until the light blinks — if the light isn't blinking, it's not in pairing mode yet. Also check that your keyboard is charged or has fresh batteries, and that Bluetooth is turned on in your iPad's settings.

Can I use my Logitech keyboard with multiple iPads?

Yes. Pair your keyboard with each iPad separately by putting it in pairing mode and selecting it from Bluetooth settings on each device. When you switch between iPads, your keyboard will automatically connect to whichever one is nearby and has Bluetooth turned on.

My keyboard was working but now it's disconnected. What do I do?

First, check that your keyboard is still turned on and charged. Then go to Bluetooth settings and look for your keyboard in the list. If it says "Not Connected," tap it to reconnect. If it's not in the list at all, turn your keyboard off and back on, then put it in pairing mode again by holding the Bluetooth button.

Do I need to charge my Logitech keyboard, or does it use batteries?

This depends on your model. Some Logitech keyboards have a built-in rechargeable battery and come with a USB charging cable. Others use AA or AAA batteries that you replace when they run out. Check your keyboard's manual or the Logitech website to find out which type you have.

Can I use a Logitech keyboard with an iPad and a computer at the same time?

Most Logitech keyboards can only connect to one device at a time. If you want to switch between your iPad and a computer, you'll need to forget the pairing on one device before pairing with the other. Some newer Logitech models have a button to switch between multiple paired devices, but you'll need to check your keyboard's manual to see if yours has this feature.