The Kodak Pixpro FZ55 charges through a USB cable connected to any standard power source

The Kodak Pixpro FZ55 does not use a separate charging dock or removable battery. Instead, you charge the camera's built-in battery by plugging a USB cable directly into the camera's USB port, then connecting the other end to a power adapter, computer, or any device with a USB outlet. The camera will charge whether it is powered on or off, though charging is faster when the camera is turned off.

The camera comes with a USB cable in the box. You will need a USB power adapter — a standard 5V adapter like the kind used for phones and tablets works fine. If you do not have one, any USB-A to micro-USB cable paired with a standard phone charger will work.

Key Takeaways

  • The Kodak Pixpro FZ55 has a built-in battery that charges via USB cable plugged directly into the camera.
  • You can charge the camera using any standard 5V USB power adapter, a computer's USB port, or a portable power bank.
  • A full charge from empty takes approximately two to three hours when using a standard 1A power adapter.
  • The camera's battery indicator light shows red while charging and turns green when fully charged.

Where to find the USB port on your camera

The USB port is located on the bottom of the camera, near the tripod socket. It is a micro-USB port, the same size used on many Android phones and older tablets. Look for a small rectangular opening on the underside of the camera body.

Before plugging in the cable, make sure the port is clean and free of dust or debris. If you notice lint or dirt, gently blow it out or use a dry cloth to wipe the opening. Do not use water or liquid cleaners on the port.

Charging from a wall outlet

Plug the USB cable into the micro-USB port on the bottom of the camera. Take the other end of the USB cable and insert it into a USB power adapter, then plug the adapter into a wall outlet. The camera's battery indicator light — located on the top or back of the camera depending on your model — will turn red to show charging is in progress.

Leave the camera plugged in until the light turns green, which signals the battery is fully charged. This typically takes two to three hours from a completely empty battery. You can use the camera while it charges, though this will slow the charging process slightly.

Charging from a computer or laptop

Connect the USB cable to your camera's micro-USB port, then plug the other end into any available USB port on your computer or laptop. The camera will begin charging, though more slowly than when using a dedicated power adapter. A computer's USB port typically provides less power than a wall adapter, so a full charge may take four to five hours.

This method is useful if you are traveling with a laptop or working at a desk. However, if your computer enters sleep mode or turns off, charging will stop. Keep your computer awake while charging if you want the process to continue uninterrupted.

Using a portable power bank

A portable USB power bank works well for charging the Kodak Pixpro FZ55 when you are away from outlets. Connect the USB cable to the camera's micro-USB port, then plug the other end into any USB port on the power bank. The camera will charge at the same speed as it would from a wall outlet, provided the power bank has enough charge remaining.

Choose a power bank with at least 5,000 mAh capacity to get a meaningful charge on your camera. Higher-capacity power banks (10,000 mAh or more) can fully charge your camera multiple times before needing to be recharged themselves. This is especially useful for extended trips or outdoor photography sessions.

How to tell when your battery is fully charged

The battery indicator light on your camera is your main guide. When you first plug in the camera, the light turns red or amber to show charging is active. Once the battery reaches full capacity, the light changes to green. At that point, you can safely unplug the camera.

Some Kodak Pixpro models also display a battery percentage on the camera's screen when you power it on. If your camera has this feature, you can check the exact charge level by turning on the camera and looking at the status display. A full battery is typically shown as 100% or a full battery icon.

Troubleshooting charging problems

If the indicator light does not turn on when you plug in the camera, first check that the USB cable is fully inserted into both the camera port and the power source. Try a different USB cable if one is available — the original cable may be damaged. Also test a different power adapter or USB port to rule out a problem with the power source itself.

If the camera still does not charge after trying different cables and power sources, the battery or charging port may have a hardware issue. In this case, contact Kodak support or visit an authorized repair center. Do not attempt to open the camera or replace the battery yourself, as the Kodak Pixpro FZ55's battery is permanently installed.

Frequently Asked Questions

Can I use any micro-USB cable to charge my Kodak Pixpro FZ55?

Yes. Any standard micro-USB cable will work with your camera. You do not need a special Kodak cable. The cable that came with your camera is a standard micro-USB cable, so if you lose it, you can replace it with any micro-USB cable from another device or purchase one inexpensively online or at an electronics store.

How long does a full battery charge last?

Battery life depends on how you use the camera. With typical photo-taking and video recording, a full charge lasts between two and four hours. Using the camera's flash frequently, recording video continuously, or using the zoom feature heavily will drain the battery faster. Turning off the camera when not in use extends battery life significantly.

Is it safe to leave the camera plugged in overnight?

Yes. Once the battery is fully charged and the indicator light turns green, the camera stops charging and will not overcharge. Leaving it plugged in overnight is safe and will not damage the battery. However, unplugging it once it is fully charged is a good habit and saves a small amount of electricity.

What should I do if the battery drains very quickly?

A battery that drains faster than normal may be aging or damaged. Try fully charging the camera and using it without the flash or video recording to see if battery life improves. If the battery continues to drain unusually fast after a full charge, the battery itself may need replacement. Contact Kodak support to discuss repair or battery replacement options.

Can I charge the camera while recording video?

Yes, you can charge the camera while it is powered on and recording. However, the charging process will be slower because the camera is using power at the same time it is receiving it. For the fastest charge, turn off the camera before plugging it in.