The basic steps to pair a Logitech keyboard with iPad

Most Logitech keyboards connect to iPad through Bluetooth, which means turning on the keyboard's Bluetooth mode, then finding it in your iPad's settings and selecting it. The exact steps depend on whether your keyboard is wireless (battery-powered) or rechargeable (charges via USB), but both types use the same Bluetooth pairing process once you've powered them on.

Before you start, make sure your iPad is running iPadOS 14.3 or later — older versions sometimes have trouble recognizing Logitech keyboards. You can check this in Settings > General > About, where it shows your current iPadOS version.

Key Takeaways

  • Turn on your Logitech keyboard and put it in pairing mode, usually by holding a Bluetooth button for three to five seconds until a light blinks.
  • Go to iPad Settings > Bluetooth, make sure Bluetooth is on, and wait for your keyboard to appear in the "Other Devices" list.
  • Tap your keyboard's name in the list, and if prompted for a code, type the four digits shown on your iPad screen into the keyboard.
  • Once paired, your keyboard will reconnect automatically when you turn it on and your iPad is nearby.
  • If your keyboard does not appear after two minutes, restart both devices and try again.

How to put your Logitech keyboard into pairing mode

Every Logitech keyboard has a Bluetooth button, usually on the top edge or side. Hold this button down for three to five seconds — you should see a light on the keyboard start blinking, often in blue or white. This blinking light means the keyboard is now in pairing mode and searching for a device to connect to.

If your keyboard has multiple Bluetooth buttons (labeled 1, 2, and 3), you only need to hold one of them. Logitech keyboards can pair with up to three devices at once, and each button connects to a different device. Holding button 1 puts the keyboard in pairing mode for your first device — in this case, your iPad.

Some older Logitech models have a small switch on the bottom instead of a button. Slide this switch to the "On" position, and the keyboard will enter pairing mode automatically. Check your keyboard's manual if you cannot find the Bluetooth button — the model number is usually printed on the back or bottom.

Finding and selecting your keyboard in iPad settings

Open your iPad's Settings app, then tap Bluetooth in the left menu. Make sure the toggle at the top is turned on (it should be blue). Your iPad will now scan for nearby Bluetooth devices.

Wait about 30 seconds. Your Logitech keyboard should appear in the list under "Other Devices" with its model name — something like "Logitech K380" or "Logitech Keys-to-Go." Tap the keyboard's name to start pairing.

If you do not see your keyboard after two minutes, turn it off completely, wait five seconds, turn it back on, and hold the Bluetooth button again. Then return to the iPad's Bluetooth settings and look again.

Entering the pairing code if your iPad asks for one

After you tap your keyboard's name, your iPad may display a four-digit code on the screen. This is a security step to make sure you are pairing with the right device. Type this code using your keyboard — you do not need to press Enter or Return when you are done, just type the four digits.

If no code appears on your iPad screen, the pairing is complete and you can start using your keyboard right away. Some Logitech models skip this step entirely.

If you type the code and nothing happens, or if the pairing fails, restart your iPad by turning it off and back on, then try the pairing process again from the beginning.

What to do if your keyboard will not pair

The most common reason a Logitech keyboard will not pair is that Bluetooth on the iPad is turned off. Go back to Settings > Bluetooth and confirm the toggle is blue and switched on.

The second most common issue is that the keyboard's battery is too low. If your keyboard is wireless and battery-powered, try replacing the batteries with fresh ones. If it is rechargeable, plug it into a USB charger for at least 30 minutes, then try pairing again.

If you have already paired this keyboard with another device (like a phone or laptop), it may still be connected to that device. Turn off Bluetooth on the other device, or "forget" the keyboard from that device's Bluetooth settings. Then try pairing with your iPad again.

As a last resort, reset the keyboard itself. Most Logitech keyboards have a small reset button on the bottom or back — hold it for 10 seconds with a paperclip or pen. This clears all previous pairings and lets you start fresh. Check your keyboard's manual for the exact location of the reset button, since it varies by model.

Using your keyboard once it is paired

Once your keyboard is paired, it will reconnect automatically whenever you turn it on and your iPad is nearby. You do not need to pair it again unless you reset the keyboard or remove it from your iPad's Bluetooth settings.

Your keyboard will work with any app on your iPad — email, documents, web browsers, and most others. Some apps have special keyboard shortcuts that let you do things faster. For example, in many apps, Command+S saves a document, and Command+Z undoes your last action. These shortcuts work the same way on iPad as they do on a Mac.

If your keyboard stops responding, the simplest fix is to turn it off and back on. If that does not work, go to Settings > Bluetooth, tap the information icon next to your keyboard's name, and select "Forget This Device." Then pair it again from the beginning.

Frequently Asked Questions

Do I need to charge my Logitech keyboard?

It depends on the model. Wireless keyboards with replaceable batteries do not need charging — just swap in new AA or AAA batteries when they run low. Rechargeable models come with a USB cable and need to be plugged in periodically, usually lasting one to three months per charge depending on how much you use them.

Can I use the same keyboard with my iPad and my laptop?

Yes. Logitech keyboards can pair with multiple devices at once. If your keyboard has numbered Bluetooth buttons, each button is set to a different device. Press button 1 to switch to your iPad, button 2 to switch to your laptop. The keyboard will reconnect to whichever device you last used it with.

Why does my keyboard keep disconnecting from my iPad?

This usually happens if your iPad's Bluetooth is turned off, or if the keyboard's battery is low. Check both. If the keyboard is still disconnecting after you replace the batteries or recharge it, try forgetting the device in Settings > Bluetooth and pairing it again from scratch.

Will my Logitech keyboard work with an older iPad?

Most Logitech keyboards work with iPads running iPadOS 14.3 or later. If your iPad is older than that, check Logitech's website for your specific keyboard model to see what versions of iPadOS it supports. You may need to update your iPad's software to use the keyboard.

What if I lost the manual for my keyboard?

You can find the manual online by searching for your keyboard's model number (printed on the back or bottom) plus "manual" or "user guide." Logitech's support website has PDFs for most models. The model number usually looks like "K380" or "Keys-to-Go."