The basic process: pairing over Bluetooth
A Logitech wireless keyboard connects to your iPad through Bluetooth, the same wireless technology that pairs headphones or speakers. The keyboard and iPad find each other, confirm they're talking to the right device, and then stay connected. You'll do this once, and the iPad will remember the keyboard after that.
The steps are straightforward: turn on the keyboard, put it in pairing mode, then tell your iPad to look for it. Most Logitech keyboards pair in under a minute. If your keyboard is brand new, the battery may be low — charge it for at least 30 minutes before you start.
Key Takeaways
- Turn on your Logitech keyboard and hold the Bluetooth button (usually marked with a Bluetooth symbol) for three to five seconds until a light blinks, signaling pairing mode.
- On your iPad, go to Settings, then Bluetooth, and turn Bluetooth on if it isn't already — your keyboard should appear in the list of available devices within 10 seconds.
- Tap the keyboard name in the Bluetooth list to pair it; your iPad will show "Connected" next to the keyboard name when pairing is complete.
- Once paired, your iPad will automatically reconnect to the keyboard whenever both devices are on and within Bluetooth range (typically 30 feet).
- If pairing fails, restart both the keyboard and iPad, then try again — this solves most connection problems.
Finding the pairing button on your Logitech keyboard
Every Logitech wireless keyboard has a button to enter pairing mode, but its location varies by model. Look for a button marked with the Bluetooth symbol (it looks like a stylized "B" made of dots). On most Logitech keyboards, this button is on the back or underside of the device. Some models have it on the side.
If you can't find a Bluetooth button, check the keyboard's manual or the Logitech support page for your specific model number. The model number is usually printed on the back or bottom of the keyboard. You can also search "Logitech [model number] pairing" to find instructions specific to your device.
Once you've located the button, hold it down for three to five seconds. You should see a light on the keyboard begin to blink — this means the keyboard is now in pairing mode and searching for a device to connect to. Leave it in this mode while you move to your iPad.
Turning on Bluetooth and finding your keyboard on iPad
On your iPad, open the Settings app (the gray gear icon on your home screen). Tap Bluetooth in the left menu. If Bluetooth is off, toggle it on — you'll see the switch turn green.
Within 10 seconds, your Logitech keyboard should appear in the list of available devices. It will show the keyboard's name, which is usually something like "Logitech K380" or "Logitech Keys-To-Go." Tap the keyboard name to start pairing.
Your iPad may ask you to confirm the pairing or enter a code. If a code appears on your screen, type it on the keyboard and press Enter. Once the pairing is complete, you'll see "Connected" written next to the keyboard name in the Bluetooth settings. You can now close Settings and start using the keyboard.
What to do if the keyboard doesn't appear in the Bluetooth list
If you've held the Bluetooth button for several seconds but the keyboard doesn't show up on your iPad, the keyboard may not be in pairing mode. Try holding the button again for a full five seconds — some models require a longer press. Make sure the keyboard is turned on; check for a power switch on the back or side.
If the keyboard still doesn't appear, restart both devices. Turn off the keyboard completely, then turn it back on. On your iPad, go to Settings, tap Bluetooth, and toggle it off, wait five seconds, then toggle it back on. Try pairing again.
If the keyboard has been paired to another device (like a phone or computer), it may still be trying to connect to that device instead of your iPad. Unpair it from the other device first, or restart the keyboard to clear its memory. Consult the keyboard's manual if you're unsure how to do this.
Reconnecting after the first time
Once your keyboard and iPad are paired, they'll automatically reconnect whenever both are turned on and within Bluetooth range — usually about 30 feet. You won't need to go through the pairing process again. Just turn on the keyboard, and your iPad will recognize it within a few seconds.
If your iPad doesn't reconnect automatically, make sure Bluetooth is still turned on in Settings. If the keyboard is far away or has been off for a while, it may take 10 to 15 seconds to reconnect. If it still won't connect after a minute, restart the keyboard and try again.
Troubleshooting a keyboard that was working but stopped
If your keyboard was connected before but suddenly stopped working, the most common cause is that Bluetooth got turned off. Check Settings > Bluetooth and make sure it's on. If it is, toggle it off and back on to refresh the connection.
If that doesn't work, restart the keyboard by turning it off and back on. Some Logitech keyboards have a power switch; others turn off automatically after a period of inactivity. Check the battery level — if the keyboard's battery is very low, it may not maintain a connection. Charge it for at least 30 minutes.
If the keyboard still won't connect, "forget" it from your iPad and pair it again. Go to Settings > Bluetooth, find the keyboard name, tap the "i" icon next to it, and select "Forget This Device." Then follow the pairing steps from the beginning. This clears any corrupted connection data and usually solves the problem.
Using the keyboard with iPad apps and typing
Once paired, your Logitech keyboard works with any iPad app that accepts text input — email, notes, documents, web browsers, and messaging apps. The keyboard sends keystrokes directly to the app you're using, just like a keyboard on a computer would.
Some iPad apps have keyboard shortcuts that work with external keyboards. For example, in many apps, Command+S saves a document, and Command+Z undoes an action. These shortcuts vary by app, so check the app's help menu or settings if you want to learn what shortcuts are available.
The iPad's on-screen keyboard will not appear when your Logitech keyboard is connected and active. If you need to use the on-screen keyboard, disconnect the Logitech keyboard by going to Settings > Bluetooth and tapping the "i" icon next to the keyboard name, then selecting "Disconnect." You can reconnect it the same way.
Frequently Asked Questions
Can I use my Logitech keyboard with multiple iPads?
Yes. Once you pair the keyboard with one iPad, you can pair it with another iPad by following the same steps. Most Logitech keyboards can remember multiple devices. To switch between them, go to Bluetooth settings on the device you want to use and tap the keyboard name to reconnect.
Why does my keyboard keep disconnecting?
Disconnections usually happen when the battery is low, the keyboard is out of Bluetooth range, or Bluetooth interference is present. Charge the keyboard fully, keep it within 30 feet of your iPad, and move away from devices like microwaves or cordless phones that can interfere with Bluetooth. If disconnections continue, restart both devices and re-pair them.
Do I need to install any software or drivers on my iPad?
No. iPad handles Bluetooth pairing automatically — you don't need to download anything or install drivers. Just pair the keyboard through Settings, and it's ready to use.
What if my keyboard has a USB receiver instead of Bluetooth?
iPads don't have USB ports, so USB receivers won't work. You need a Logitech keyboard with Bluetooth. Check the keyboard's manual or the Logitech website to confirm it supports Bluetooth before you buy.
Can I use keyboard shortcuts to control iPad functions?
Some shortcuts work — for example, Command+Home takes you to the home screen on many iPad models. However, iPad doesn't support as many system-level keyboard shortcuts as a computer does. Experiment with common shortcuts, or check Apple's support pages for a full list of iPad keyboard shortcuts.