Connect your new Firestick remote by putting it in pairing mode and selecting it from your device's settings menu

A new Firestick remote pairs through a straightforward process that takes about two minutes. Your Fire TV device will search for the remote once you hold down the home button, and you'll confirm the pairing on your screen. The remote and device communicate over Bluetooth, so they need to be in the same room and within about 30 feet of each other during setup.

Most pairing problems happen because the remote batteries are dead or the device is too far away. If pairing fails on your first try, check the battery compartment on the back of the remote and replace the batteries if they're low or missing.

Key Takeaways

  • Hold the home button on your new remote for about 10 seconds until the light on your Fire TV device blinks, then release.
  • Your Fire TV will show a pairing code on screen — select "Pair" or "Continue" to complete the connection.
  • The remote and device must be within 30 feet and in the same room for Bluetooth pairing to work.
  • If pairing fails, replace the batteries in the remote and try again from the beginning.

Step-by-step pairing for a new remote

Start with your Fire TV device powered on and your new remote in hand. Make sure the remote has fresh batteries installed — open the battery compartment on the back and insert two AA batteries with the correct polarity marked inside the compartment.

Point the remote at your Fire TV device and hold down the home button (the button with a house icon at the top center) for about 10 seconds. You'll see the light on your Fire TV device begin to blink, which means it's in pairing mode. Keep holding the button until the light stops blinking, then release.

Your Fire TV screen will display a pairing code or a prompt asking you to confirm the connection. Select "Pair," "Continue," or "Confirm" using your old remote or the buttons on your Fire TV device itself. Once you see a confirmation message, the new remote is connected and ready to use.

What to do if the remote won't pair

If nothing happens when you hold the home button, the batteries are likely dead or installed incorrectly. Open the battery compartment again and check that both batteries are making contact with the metal springs inside. Remove them, wait a few seconds, and reinsert them firmly. Try the pairing process again.

If the remote still won't pair, move closer to your Fire TV device — Bluetooth range can be blocked by walls, metal objects, or interference from other wireless devices. Stand within 10 feet of the device and try pairing once more. If you're still having trouble, restart your Fire TV device by unplugging it for 30 seconds, plugging it back in, and waiting for it to fully boot up before attempting to pair again.

Pairing a remote to a different Fire TV device

If you want to use the same remote with a different Fire TV device in another room, you'll need to unpair it from the first device and pair it with the second one. On the first device, go to Settings, then Remote & Bluetooth Devices, find your remote in the list, and select "Unpair" or "Remove."

Once unpaired, take the remote to your second Fire TV device and repeat the pairing process by holding the home button for 10 seconds. The remote will pair with whichever Fire TV device is closest and in pairing mode, so make sure the second device is powered on and ready before you start.

Replacing an old remote with a new one

When you buy a replacement remote, it comes unpaired from the factory. Your old remote will continue to work with your Fire TV device unless you unpair it manually. You can keep both remotes connected at the same time — Fire TV devices support multiple remotes, so you might want to keep the old one as a backup.

If you want to remove the old remote to avoid confusion, go to Settings on your Fire TV, select Remote & Bluetooth Devices, find the old remote in the list, and choose "Unpair" or "Remove." After that, only your new remote will control the device.

Troubleshooting common pairing issues

If your Fire TV shows a pairing code but the remote doesn't respond after you select it, the Bluetooth connection may have dropped. Unplug your Fire TV device, wait 30 seconds, plug it back in, and try pairing the remote again once the device has fully restarted.

If you see an error message saying the remote is already paired to another device, that remote may have been used with a different Fire TV in the past. Unplug that other Fire TV device for a minute, then plug it back in. This will clear the old pairing. Then try pairing the remote with your current device.

For remotes with a voice button (the microphone icon), make sure your Fire TV device has a microphone enabled in its settings. Some Fire TV models require you to turn on the microphone feature separately before voice commands will work, even though the remote itself is paired.

Frequently Asked Questions

Can I use one remote with multiple Fire TV devices?

Yes, but only one at a time. A remote pairs with one Fire TV device and will control only that device until you unpair it and pair it with a different one. If you have multiple Fire TV devices in your home, you'll need a separate remote for each one, or you'll need to unpair and re-pair the same remote when you switch between devices.

Why does my remote keep losing connection?

Bluetooth range is typically 30 feet, but walls and metal objects can reduce that distance. If your remote keeps disconnecting, move closer to your Fire TV device or remove obstacles between them. Also check that the batteries aren't running low — a weak battery can cause intermittent connection problems.

Do I need to unpair my old remote before pairing a new one?

No. Fire TV devices support multiple remotes at the same time, so your old remote will continue to work even after you pair a new one. You only need to unpair the old remote if you want to prevent it from controlling the device.

What if my remote has a voice button that isn't working?

The remote may be paired, but the microphone feature might be turned off on your Fire TV device. Go to Settings, then Device & Accessories, and look for a Microphone or Voice option. Make sure it's enabled. If you still don't hear a response, check that your Fire TV has an internet connection.

Can I pair a Firestick remote to a non-Amazon device?

No. Firestick remotes are designed to work only with Fire TV devices and Fire TV Sticks. They use a proprietary pairing system and won't connect to other brands of streaming devices or televisions.