Connect via Bluetooth in four steps

The Woojer Vest 4 connects to your PC through Bluetooth, the same wireless standard your phone uses. The process takes about two minutes and only needs to happen once — after that, the vest will reconnect automatically when you turn it on near your computer.

First, make sure your Woojer Vest 4 is powered on. You'll see a blue light on the device when it's ready. On your PC, open Settings, then go to Bluetooth & devices. Click "Add device" and select Bluetooth from the menu that appears. Your PC will begin searching for nearby devices.

When you see "Woojer Vest 4" in the list of available devices, click it. Your PC will ask you to confirm the pairing — select "Yes" or "Pair" depending on your Windows version. Once the vest shows as "Connected" in your Bluetooth settings, the pairing is complete.

If the vest doesn't appear in the list, make sure it's in pairing mode. Most Woojer devices enter pairing mode automatically when turned on if they haven't been paired before, but check the manual that came with your vest to confirm the pairing button location if needed.

Key Takeaways

  • The Woojer Vest 4 uses Bluetooth to connect to your PC, and the pairing process only needs to happen once.
  • You'll need to turn on the vest, open Bluetooth settings on your PC, and select the vest from the available devices list.
  • After pairing, the vest will reconnect automatically whenever both devices are powered on and in range.
  • If the vest doesn't appear during pairing, check that it's in pairing mode by consulting the manual that came with your device.

What to do if Bluetooth pairing fails

If your PC doesn't detect the Woojer Vest 4, the most common cause is that the vest is not in pairing mode. Turn the vest off completely, wait five seconds, then turn it back on. It should automatically enter pairing mode if it has never been paired with that PC before.

If the vest still doesn't appear, restart your PC's Bluetooth radio. Go to Settings > Bluetooth & devices, toggle Bluetooth off, wait ten seconds, then toggle it back on. This clears temporary connection problems that sometimes prevent new devices from showing up.

Make sure your PC's Bluetooth is actually turned on — it's easy to miss that the toggle is already off. Also check that no other device is currently paired to the vest. The Woojer Vest 4 can connect to multiple devices, but it can only actively pair with one at a time, so if it's connected to your phone, disconnect it there first.

Using the Woojer app on Windows

Once your vest is paired via Bluetooth, you can download the Woojer app from the Microsoft Store to customize your haptic settings. The app lets you adjust vibration intensity, choose which parts of the vest respond to different frequencies, and save profiles for different types of content.

Search for "Woojer" in the Microsoft Store and install the official app. When you open it, the app will automatically detect your connected vest. You don't need to pair again — the app uses the Bluetooth connection you already set up in Windows settings.

The app is optional. Your vest will work with any audio software on your PC without the app installed, but the app gives you finer control over how the haptic feedback feels. If you're using the vest for gaming or music, the app's presets can save you time tuning the settings.

Connecting to specific programs and games

Once your Woojer Vest 4 is paired and the app is installed, most programs and games will automatically send audio to the vest without any extra setup. The vest appears as an audio output device in Windows, so any software that plays sound can send that sound to the vest's haptic system.

In some games, you may need to manually select the Woojer device as your audio output. Open the game's audio settings and look for an output device dropdown. If you see "Woojer Vest 4" or a similar name, select it. If the game doesn't show a device selector, it's using your system's default audio output, which you can change in Windows Settings > Sound > Volume mixer.

For music and video, the vest will respond to whatever audio is playing through your PC's speakers or headphones. You don't need to change anything in the software itself — the vest picks up the audio signal automatically once it's paired.

Troubleshooting connection drops

If your vest disconnects randomly during use, the most likely cause is that it's too far from your PC. Bluetooth typically works reliably up to about 30 feet in open space, but walls and metal objects can reduce that range. Try moving closer to your PC or removing obstacles between the vest and your computer.

Another common cause is low battery on the vest. When the battery drops below 20 percent, the Bluetooth connection can become unstable. Charge your vest fully and see if the disconnections stop. The vest should take about two to three hours to charge completely.

If disconnections continue even when the vest is fully charged and close to your PC, unpair the device and pair it again from scratch. Go to Settings > Bluetooth & devices, find the Woojer Vest 4 in your paired devices, click it, and select "Remove device." Then follow the pairing steps again as if it were the first time.

Using the vest with multiple PCs

Your Woojer Vest 4 can be paired with multiple computers, but it can only connect to one at a time. If you want to use it with both a desktop and a laptop, pair it with each one separately. The vest will remember both pairings and will automatically connect to whichever PC it finds first when you turn it on.

If the vest connects to the wrong PC, manually disconnect it from that device's Bluetooth settings and turn the vest off. Then turn the vest back on near the PC you want to use it with. It will connect to that PC instead.

You don't need to unpair from the first PC to use it with the second — just let the vest connect to whichever device is nearby. This is useful if you have both a work and personal computer and want to use the vest with either one depending on what you're doing.

Frequently Asked Questions

Do I need to install drivers for the Woojer Vest 4 on Windows?

No. Windows 10 and Windows 11 have built-in Bluetooth drivers that work with the Woojer Vest 4 automatically. You only need to pair the vest through Bluetooth settings and optionally install the Woojer app from the Microsoft Store for customization.

Can I use the vest with both audio and video at the same time?

Yes. Once the vest is paired, it will respond to any audio coming from your PC, whether that's from a game, video, music player, or video call. The vest doesn't distinguish between different types of audio — it converts all sound into haptic feedback.

What if my PC doesn't have Bluetooth built in?

You can buy a USB Bluetooth adapter for about $15 to $30. Plug it into a USB port on your PC, and Windows will automatically recognize it. Then pair your Woojer Vest 4 to the adapter the same way you would to built-in Bluetooth.

Will the vest drain my PC's battery?

No. The vest uses its own battery and only receives a Bluetooth signal from your PC. Bluetooth uses very little power on the PC side, so pairing the vest will not noticeably affect your computer's battery life.

Can I use the vest while my PC is in sleep mode?

No. Your PC must be awake and unlocked for the vest to receive audio. If your PC goes to sleep, the Bluetooth connection will drop and the vest will stop receiving haptic feedback. Wake your PC to reconnect.