The side button on your Redragon mouse can be disabled through the Redragon software or by remapping it to do nothing
Redragon mice come with side buttons (usually two thumb buttons on the left side) that are set to forward and back commands by default. If you don't use these buttons or they get in your way, you have two straightforward options: disable them entirely through the Redragon software, or remap them to a neutral function so they stop triggering commands.
The easiest route depends on which Redragon mouse you own. Some models use the Redragon Control Center software, while others use the older Redragon Game Master app. Both let you turn off the side buttons in under a minute.
Key Takeaways
- Download the Redragon Control Center or Game Master software from Redragon's website — the software matches your specific mouse model.
- Open the app, find your mouse in the device list, and navigate to the button mapping or macro section.
- Set each side button to "Disabled" or "None" to stop them from firing commands.
- Save your settings — most Redragon mice store the configuration in onboard memory, so the buttons stay disabled even if you unplug the mouse.
Download and install the correct Redragon software
Visit the official Redragon website and go to the Support or Downloads section. Search for your specific mouse model — you can find this on the bottom of the mouse or in your purchase receipt. Download the software that matches your model.
If your mouse is newer (released in the last few years), you almost certainly need the Redragon Control Center. Older models may require Game Master. The website will show you which one applies to your mouse.
Run the installer and follow the on-screen prompts. You may need to restart your computer after installation. Plug your Redragon mouse into a USB port before you launch the software for the first time.
Open the software and locate your mouse
Launch the Redragon Control Center or Game Master application. The software should automatically detect your mouse and display it in the main window. If you have multiple Redragon devices connected, click on your mouse model to select it.
Look for a section labeled "Buttons," "Button Mapping," "Macros," or "Customize." This is where you control what each button does. The exact name varies depending on which software version you have, but it will be one of the main tabs or menu options.
Disable the side buttons
In the button mapping section, you will see a list of all your mouse buttons. Find the side buttons — these are usually labeled as "Side Button 1" and "Side Button 2," or sometimes "Forward" and "Back" if they are already mapped to those commands.
Click on each side button and change its setting to "Disabled," "None," or "Do Nothing." The exact wording depends on your software version. Some versions have a dropdown menu; others let you click the button and select from a list. Set both side buttons this way if you want to disable them completely.
If you want to keep one side button active but disable the other, you can do that too — just change only the one you don't want to use.
Save your settings and test
Look for a "Save" or "Apply" button, usually at the bottom of the window. Click it to store your changes. Most Redragon mice have onboard memory, which means the settings are saved directly to the mouse itself. You can close the software and unplug the mouse, and the side buttons will stay disabled.
Test the side buttons by clicking them. They should no longer trigger any commands — no forward or back navigation, no macro execution, nothing. If they still respond, go back into the software and verify that you saved the changes correctly.
What to do if the software won't open or detect your mouse
If the Redragon software crashes or won't recognize your mouse, try unplugging the mouse, waiting 10 seconds, and plugging it back in. Then restart the software. Sometimes a fresh connection fixes detection issues.
If the software still won't open, check that you downloaded the version that matches your mouse model. Visit the Redragon website again and double-check the model number on your mouse against the download page. Downloading the wrong version is the most common cause of this problem.
If you cannot get the software to work at all, you can also disable the side buttons through Windows settings. Go to Settings > Devices > Mouse, scroll down to "Related Settings," and click "Additional Mouse Options." In the Buttons tab, you can sometimes remap or disable side buttons there, though this method works less reliably than the Redragon software.
Frequently Asked Questions
Will disabling the side buttons affect the rest of my mouse?
No. Disabling the side buttons only turns off those specific buttons. Your main left and right click, scroll wheel, and any other buttons remain fully functional. You are only changing what the side buttons do.
Can I re-enable the side buttons later if I change my mind?
Yes. Open the Redragon software again, set the side buttons back to their original function (usually "Forward" and "Back"), and save. The buttons will work again immediately.
Do I need to keep the software running for the disabled buttons to work?
No. Once you save the settings, they are stored in the mouse's onboard memory. You can close the software and even uninstall it — the side buttons will stay disabled. The software is only needed if you want to change the settings again.
What if my Redragon mouse doesn't have side buttons?
Some Redragon models, particularly budget or wireless versions, do not include side buttons. If your mouse has no buttons on the side, there is nothing to disable. Check the product manual or the Redragon website to confirm your mouse model's button layout.
Can I remap the side buttons to something else instead of disabling them?
Yes. In the button mapping section of the software, you can set each side button to any other function — a different keystroke, a macro, a volume control, or anything else the software supports. This is useful if you want to repurpose the buttons for a game or application you use frequently.